Products

Let the world use good meters

ES1010 Wireless H/L Voltage Current Ratio Tester

High voltage range :0.0mA-1200A
Low voltage range : 0.0mA -20A
High voltage clamp jaw : 50mm
Low coltage clamp jaw : 8mm
Shift gear :automatic shift
line voltage : below 60KV

Tester	High voltage detector	Mainframe (current clamp)
Range	0.0mA～1200A（50/60Hz Auto）	0.0mA～20A
Resolution	0.1mA	0.1mA
Jaw size	φ50mm	φ7.5mm
Accuracy	±2%±5dgt	±0.5%±5dgt
Sampling Rate	2 times/second
Function	High-low voltage current transformer primary and secondary loop current, transformation ratio, polarity, phase, and on-line test; current and voltage ratio on both sides of transformer; on-line test; load current test
Transmission type	Wireless transmission, linear transmission distance 30m
Change gear	Fully automatic shift
Power	DC6V 7# alkaline battery（1.5V AAA×4）	DC7.5V 5# alkaline battery（1.5V LR6×5）
Test method	Clamp CT
Dimensions	W/T/H 8737262mm	Host：W/T/H 10035204mm
		Current clamp：W/T/H 4220137mm
Display mode	LCD：128dots×64dots Blue screen backlight for dim places
LCD Size	62mm×44mm
Change ratio	Three kinds of transformation ratio display: (The primary and secondary circuit actually measured the current transformation ratio; the conversion ratio of the secondary circuit 5A; 10kV-YY transformer conversion ratio of 10kV/380V), the maximum ratio of 1:1 million
Line voltage	Line test with insulation sheath below 60kV or bare wire current test below 35kV (with insulation rod operation)
Lead length	Current clamp lead 2 meters
Weight	Total instrument weight：7Kg（Insulated rod and instrument package）
	High pressure detector：370g（Including battery）
	Host：409g（Including battery）
	Current clamp：180g
Data interface	USB transmission
Overflow display	Over-range overflow function: “OL A” symbol display
Data storage	500 groups, press MENU to keep data, HOLD symbol display, press MENU again to cancel
Data review	Long press the MENU button to enter the data reference mode, MR symbol display, press MENU again to exit
Data is full	Data full function: “FULL” symbol display
Switch display mode	Long press the POWER button to switch between the test display mode and the conversion ratio display mode
No signal indication	When the host does not receive the transmit signal, it prompts “no signal”
Automatic shut-down	About 15 minutes after power on, the meter will automatically shut down
Battery voltage	When the battery voltage drops to 3.5V, the low-power indicator lights to remind you to replace the battery	When the battery voltage drops to 5.2V, the battery voltage is low symbol to remind to replace the battery
Insulation rod	Five section insulation rod (5 meters)
Insulation strength	AC 60kV/rms
Line test	Insulation sheath wire test below 60kV line voltage, bare wire test below 60kV (with insulation rod operation)
Working temperature	-10℃～40℃
Storage temperature	-10℃～60℃
Relative humidity	0℃～31℃≦75%，31℃～40℃≦50%
Suitable for safety regulations	IEC1010-1、IEC1010-2-032、Pollution degree 2、CAT Ⅲ(600V) IEC61326(EMC standard)